Removing the RGB/USB board | Toshiba S500M instruction

4.18 RGB/USB board

4 Replacement Procedures

3.Take out the DC-IN harness from the slot of the base assembly.

4.Take out the RGB/USB board from the slot of the base assembly. (USB harness is still connected to the back of the RGB/USB board.)

5.Disconnect the USB harness from the connector CN9610 on the RGB/USB board.

RGB/USB board

CN9610 (back of the RGB/USB board)

USB harness

DC-IN harness

Figure 4-37 Removing the RGB/USB board (2)

TECRA M11/Satellite Pro S500M Series Maintenance Manual (960-813) [CONFIDENTIAL]

4-65