Programming a Security Code
With the phone in standby, open the menu; select Ans. Setup, then select Security Code. Use the number keypad to enter a
Remember to make a note of your new security code!
Dialing In to Your System
1. Call your phone number & wait until the system answers. (If the system is turned off, it answers after 10 rings & sounds a series of beeps.)
2. During the greeting or beeps, press 0 and immediately enter your security code. If you enter it incorrectly 3 times, the system hangs up and returns to standby.
3. The system announces the time, the number of messages in memory, and a help prompt. It beeps to let you know it's waiting for a command.
4. When you hear beeping, enter a
If you don't |
|
|
|
| |
01 | Repeat message | 05 | Stop playback | ||
press any | |||||
02 | Play message | 06 | Turn the system on | ||
keys for 15 | |||||
03 | Skip message | 09 | Turn the system off | ||
seconds, the | |||||
system hangs | 04 | Delete message | 10 | Hear help prompts | |
up and return |
|
|
|
| |
to standby. |
|
|
|
|
Important Information
Solving Problems
If you have any trouble with your phone, check this section first. If you need help, call our Customer Care Line listed on the front cover.
General problems | Possible solutions |
| |
No handsets can make or | Check the telephone cord connection. |
| |
receive calls. | Disconnect the base AC adapter for a few |
| |
minutes; then reconnect it. |
| ||
|
| ||
A handset can’t make or | Move the handset closer to the base. |
| |
receive calls. |
| ||
|
|
| |
|
|
|
|
|
| English - 21 | |
|
|
|
|
