Changing to Pulse Dialing
Your phone uses tone dialing by default. If your phone company uses pulse dialing, you need to change your phone’s dial mode.
1.Press Menu/select and choose Global Setup.
2.Select Dial Mode then Pulse. You’ll hear a confirmation tone.
To send DTMF tones during a call (e.g., for an automated response system), press * to temporarily switch to tone dialing. When you hang up, the phone automatically returns to pulse dialing.
Attaching the Belt Clip
Line up the holes on each side of the handset. Insert the belt clip into the holes on each side of the handset. Press down until it clicks.
To remove the belt clip, pull either side of the belt clip to release the tabs from the holes.
Getting to Know Your Phone
Parts of the Base
Message counter
Charging | FIND | ANSWER | PLAY/ | DOWN |
DELETEHANDSET REV | ON/OFF | STOP FWD |
| |
contacts | UP |
Key (icon) | What it does |
When listening to messages: delete the current
Delete ( |
|
|
|
|
|
|
| ) | message. |
|
|
| |||||||
|
|
| |||||||
|
|
|
|
|
|
|
|
| In standby: delete all messages. |
Find Handset ( ) | In standby: page all handsets. | ||||||||
- English
