Uniden D22802 manual Multihandset Features, Conference Calling, Call Transfer Press, Privacy Mode

Models: D2280 D22802

1 28
Download 28 pages 26.18 Kb
Page 15
Image 15

Multihandset Features

To use the features in this section, you need at least 2 handsets.

Your base supports a total of 12 cordless handsets: the one that came with the base and up to 11 accessory handsets. Your base also supports a total of 2 DRX100 range extenders, including any that came with your phone.

You must register accessory handsets to the base before using them. (Handsets that came packaged with the base are already registered.)

Handsets that aren’t registered display a Not Registered message. For registration instructions, see p. 24, or see the accessory handset manual.

If a handset was ever registered to a base, you must reset it before it can register to a new base; see p. 24, or see the accessory handset manual.

Conference Calling

When an outside call comes in, four handsets can join in a conference call with the outside caller.

To join a call that’s already in progress, just press Talk or Speaker.

To leave the conference call, hang up normally; the other handset remains connected to the call.

Call Transfer

To...

Press...

 

Intercom/clear. The phone puts the call on hold and

transfer a call

prompts you to select the handset you want to page.

When the other handset accepts the call, you'll be

 

 

disconnected (press Talk to rejoin the call).

cancel a transfer

Talk to return to the call.

accept a

Intercom/clear to answer the page and speak to the other

transferred call

handset. Then, press Talk to speak to the caller.

Privacy Mode

To activate privacy mode on a call in progress, press Menu/select twice. As long as privacy mode is on, you'll see a in the display, and no other handsets can join your call. Privacy mode turns off

English - 15

Page 15
Image 15
Uniden D22802 manual Multihandset Features, Conference Calling, Call Transfer Press, Privacy Mode