Uniden manual Wall Mounting the Base DCT7565 Only

Wall Mounting the Base (DCT7565 Only)

This phone can be mounted on any standard wall plate.

1.Snap the wall mount adapter into the notches on the base top.

2.Plug the AC adapter into the DC IN 9V jack.

3.Route the AC adapter cord through the molded wiring channel as shown.

4.Plug the AC adapter into a standard 120V AC wall outlet.

5.Plug the telephone line cord into the TEL LINE jack.

6.Plug the telephone line cord into the telephone outlet.

7.Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated.

DO NOT use an AC outlet controlled by a wall switch.

Notes:

•The DCT756 base is not wall mountable.

•Use only the supplied AD-800 AC adapter with DCT7565 Base.

Do not use any other AC adapter.

14