Using the Caller ID List
You can store up to 100 Caller ID numbers in each handset. Your phone shares memory between your Phonebook and Caller ID entries. Once you reach your maximum phonebook entries of 100, Caller ID information will not be stored (but it will still display when the call comes in).
To open the Caller ID list, press [ ] (on the right side of the
Making a Call from a Caller ID Record
1.When the phone is in standby, press [ ] to open the Caller ID list.
2.Use [] or [] to find the Caller ID record you want to dial.
3.To add (or delete) a “1” at the beginning of the displayed phone number, press [*/tone/<]. To add (or remove) the stored area code to the displayed phone number, press [#/>].
4.Press [/flash] or [] to dial the number.
Note: You can also press [/flash] before you open the Caller ID list.
Deleting Caller ID Numbers
To delete only one Caller ID number, go to the Caller ID list and select the number you want to delete. Press [menu/clear]. When the phone asks you to confirm, select YES.
To delete all the Caller ID numbers, press [ ] (on the right side of the
Warning: When you delete a Caller ID number, you delete it permanently.
Using Call Waiting and Call Waiting Deluxe
You must subscribe through your telephone service provider to receive Call Wait- ing and Call Waiting deluxe services.
If you have Call Waiting service and a second call comes in when you are on the phone, a call waiting tone sounds. Press [ /flash] on the handset or [flash] on
35