Using your microwave oven
Microwave oven controls
There are three parts in the control section:
- Number Pads
Instructions for each control are covered on the following pages. Read them carefully.
When you first plug in the oven, a tone sounds and the Display will show 88:88. If after you set the Clock (page 6), the Display again shows all 8’s, your electricity was off for a while. Reset the Clock.
Digital displav/clock and indicator iighfs
When you are not using the microwave oven, this is an accu- rate digital clock.
When you are using the microwave oven, it displays time settings, indicator lights and shows what number pads you touched.
Command pads
Touch Command Pads to tell the microwave oven what to do and in what order. A few examples:
- STARTtells the oven to
See page 6 for informa- tion on the tone you hear when touching any pad.
Each Command Pad, (except START,CANCEL and CLOCK SET] lights an Indicator Light on the digital display. The Indicator Light comes on when you touch the Command Pad.
While the oven is running, an Indicator Light (or lights] will be on to show what the oven is doing
Number pads
Once you’ve touched a Com- mand Pad to tell the oven what you want it to do, you’ll touch Number Pads to tell it...
- a time,
temperature.
