d cuunt 0Wl-l
Changing the cooking time
The display counts down the time to
show how much time is left in the first
cycle.
When the cooking time ends, “End”
will show on the Display and 4 beeps
will sound. (You can stop the beeping
by opening the door or by touching
CANCEL.) “End” will remain on the
Display and a beep will sound every
30 seconds (to remind you that food
is left in the oven) until door is opened
or CANCEL is touched. The Display
will then show the time of day.
Cooking time can be changed any time before touching START or during the
cycle:
1 Touch COOK.
2. Touch numbers for the new time.
3. Touch START.
Cook will continue cooking for the new time.
Cooking at lower cook powers
For best results, some recipes call for lower Cook Powers. The lower the Cook Power, the
slower the cooking. Each Number Pad also stands for a different percentage of Cook Power.
Many recipes in your MICRO MENUS” Cookbook tell you, by number, which Cook Powerto use.
Recipes in other books and magazines may tell you by name (HI, MED, LO, etc.) or
percentage (10%. 50%, 80%, etc.).
The following chart gives the percentage of Cook Power each Number Pad stands for, and Cook
Power name usually used.
automatic 100% of full power HIGH
9 = 90% of full power
8 = 80% of full power
7 = 70% of full power MED-HIGH
6 = 60% of full power
5 = 50% of full power MED
4 = 40% of full power
3 = 30% of full power MED-LOW
2 = 20% of full power
1 = 10% of full power LOW
0 = no power (fan and light will be off)
DO THIS... THIS HAPPENS...
1.
Put food in the oven and
close the door.
2.
Touch COOK.
3. Touch Number Pads for the
cooking time you want.
The Display will show the numbers you
touched in the order you touched
them. This example shows 7 minutes,
30 seconds.
continued on next page