Uniden DCX200 warranty Wireless PCI Adapter

Wireless PCI Adapter

The Network Name (also known as the SSID) is the unique name shared among all points in a wireless network. The Network Name must be identical for all points in the network. It is case sensitive and must not exceed 32 characters.

In Access Point mode, you may instruct the adapter to select the first available Access Point by entering a Network Name of “ANY” (all upper case). You should not use a Network Name of “ANY” in Peer-to-Peermode.

The Peer-to-Peer Channel setting specifies the channel used in wireless communication in 802.11b Ad-Hoc mode and should be set to the same channel as the other points in the wireless network.

Note: You do not need to set the channel when using Access Point mode.

The Transmit Rate field allows you to set the transmission rate for the PCI adapter. To optimize performance and range, the Transmit Rate should be set to Fully Automatic, which will automatically adjust the transfer speed for best performance and longest range.

Wireless PCI Adapter

Note: If you experience difficulty in transfering data between computers, you should try the following steps:

∙Reposition either or both computers or Access Point (if one is being used).

∙Keep in mind that closer is not necessarily better for devices of this type. If the devices are too close together, move them apart.

∙If you have a consistent problem with many or all wireless devices on your network, you should consider using a different wireless channel for your network operations.

37 38