Uniden DSS7815, DSS7815 +1 Series Multi-Handset Features, Using DirectLink Mode, DirectLink call

Multi-Handset Features

The features in this section require a minimum of two handsets to operate. To add additional handsets to your system, see “Expanding Your Phone” on page 14.

Using DirectLink Mode

To use this feature you must enter the handsets into Directlink Mode first. To enter Directlink Mode see page 17.

￿Handsets can be in Direct Link mode while other handsets are in use.

MULTI - HANDSET

DirectLink call

1)	When the phone is in DirectLink standby mode, press
	Directlink soft key (example of DirectLink from
	handset #1).
2)	Select the handset to which you wish to DirectLink with by
	pressing the number keys (0-9). Your handset will then
	page the other handset.
3)	On the receiving handset, press talk/flash,
	the ANSWER soft key, or if Any Key Answer is		.
	on, press any number key,	/tone/ , or /

4)When you finish your conversation, press end or the END soft key on either handset. Return the handset to the cradle, or press CANCEL soft key, and then OK soft key to return to normal standby mode (canceling DirectLinkmode).

Sun 12:00A

Handset #1

Directlink Mode

CANCELDirectLink

To DirectLink

a handset

press [1-9,0]

BACK

DirectLink

Handset #2

END

FEATURES

[50]