Uniden 2465 Installing the Beltclip, Low battery alert, Cleaning the battery charging contacts

Models: 2465 DSS 2455

1 76
Download 76 pages 59.12 Kb
Page 13
Image 13

Low battery alert

When the batteries are very low and need to be charged, the phone is programmed to eliminate functions in order to save power.

The batteries need to be charged when:

- The empty battery icon appears.L o w B a t t e r y - “Low Battery” appears in the display.

If the phone is in the standby mode, none of keys will operate. If you are on a call, complete your conversation as quickly as possible, and return the handset to the cradle.

Cleaning the battery charging contacts

To maintain a good charge, it is important to clean the charging contacts on both the handset and the base unit once a month. Use a dry cloth or pencil eraser to clean.

Battery replacement and handling

contacts

When the operating time becomes short, even after a battery is recharged, please replace the battery.

Please use only “AA” rechargeable Ni-MH batteries.

Caution

Use only “AA” rechargeable Ni-MH batteries.

Do not remove the batteries from the handset to charge them.

Never throw the batteries into a fire, disassemble them, or heat them.

Do not remove or damage the battery casing.

To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden adapter model specifically designated for this product, and “AA” rechargeable Ni-MH batteries.

INSTALLING THE BELTCLIP

To attach the beltclip

Insert the beltclip into the holes on each side of the handset. Press down until it clicks into place.

To remove the beltclip

Pull both sides of the beltclip to release the tabs from the holes.

[ 7 ]

Page 13
Image 13
Uniden 2465, DSS 2455 quick start Installing the Beltclip, Low battery alert, Cleaning the battery charging contacts