2) Press [vol//] to move the pointer to select CIDCW.

3) Press [select] to toggle and turn on Caller ID on Call Waiting.

4) Press [end] and return the handset to the base unit to complete the setting. The handset returns to standby.

Note: To enable the setting change of CIDCW, you need to return the handset to the base unit when you complete the setting.

Programming Your Area Code

In some areas the telephone company may allow you to place a local call by dialing only 7 digits (instead of 10). If this is the case in your area, you can program your local area code in your phone. Programming your area code will allow you to see the caller’s 7-digit phone number which will allow you to easily return the local call without modifying the number before dialing. If you get a call from outside your area code, you'll see all 10 digits.

To program your area code:

1) When the phone is in standby, press and hold [cid/menu]. The following screen appears.

2) Press [vol//] to move the pointer to select AREA CODE.

3) Press [select]. If an area code was already stored, the phone will display it.

4) Use the number keys ( [0] [9] ) to enter the 3-digit area code. If you make an error, use [delete/channel] to backspace.

5) Press [select]. A confirmation tone sounds.

6) Press [end] or return the handset to the base unit to complete the setting. The handset returns to standby.

16

Page 17
Image 17
Uniden EXI4560 manual Programming Your Area Code