2)Enter the number ( [0] [9] ), or press [vol//] or [vol//] to select the speed dial number you would like to dial.

3)Press [talk/flash]. TALK and the volume setting and the number selected appear on the

display. Then the displayed number is dialed.

Note: You can also press [talk/flash] before you access the speed dial memory.

When you come to the phone number you want to dial, press [select].

To cancel speed dialing

Press [end] to return to standby. If accessing the list during an active call, you can press [memory] to exit the list immediately. If no key is pressed for 30 seconds, the handset will exit the speed dial list automatically.

Note: Pressing [end] to exit the speed dial list during a call will disconnect the call immediately.

Making a Call from the Caller ID List

You can place a call directly from the Caller ID list.

1) Press [cid/menu] in standby. Use [vol//] or [vol//] to select the phone number that you want to dial.

2) To have the phone dial a "1" before the displayed Caller ID number, press [1]. To have the phone dial the stored area code before the displayed Caller ID number, press [3].

3)Press [talk/flash]. The displayed phone number dials automatically.

Note:

You can also press [talk/flash] before you access the Caller ID list. When you come to the phone number you want to dial, press [select].

You cannot make a call from the Caller ID list if your cordless telephone is connected to a private branch exchange (PBX).

24

Page 25
Image 25
Uniden EXI4560 manual Making a Call from the Caller ID List, To cancel speed dialing