Uniden EXI7246C !

[8] GETTING STARTED

www.uniden.com

B. Install the Rechargeable Battery Pack into the Handset

The handset is powered by a rechargeable battery pack.

The battery recharges automatically when the handset is placed

in the base unit.

1) Press down on the handset battery case cover (use the

finger indention for a better grip) and slide the cover

downward to remove.

2) Plug the battery pack connector (red & black wires) into the

jack inside the battery compartment.

(The connector notches fit into the grooves of the jack only

one way.) Match the wire colors to the polarity label in the

battery compartment, connect the battery and listen for a

click to insure connection.

3) Make sure you have a good connection by slightly pulling on

the battery wires. If the connection is secure, the battery

jack will remain in place.

4) Place the battery case cover back in the handset by sliding

it upwards until it clicks into place.

•Use only the Uniden

(BT-905) rechargeable

battery pack supplied

with your cordless

telephone.

•Replacement batteries

are also available

through the Uniden

Parts Department at

(800) 554-3988,

Monday through Friday

from 8:00 a.m. to 5:00

p.m. or online at

www.uniden.com

!

GETTING STARTED

UP033BH_EXI7246C.book 8 ページ２００４年１月１５日　木曜日　午前１１時４７分

Contents

Main Page QUICK REFERENCE GUIDE [1] QUICK REFERENCE GUIDE Step 4 Charging the Handset EXI7246/EXI7246C Step 2 Install Handset Battery Pack and Charge Step 1 Checking the Package Contents Step 3 Set up the Base Step 5 Connect to the Phone Line [2] QUICK REFERENCE GUIDE Contents Basics RocketDial Using the Speed Dial Memory Caller ID Features Welc ome Featu res Controls and Functions Terms Used in this Manual Installing the Phone Do the following steps: A. Choose the Best Location B. Install the Rechargeable Battery Pack into the Handset ! C. Connect the Base Unit and Charge the Handset ! D. Mount the base unit on a wall Standard wall plate mounting Direct wall mounting Installing the Beltclip Headset Installation Basic Setup Activating AutoTalk Activating Caller ID on Call Waiting Entering Your Area Code Choosing the Dialing Mode Setting the Language Page Using Your Phone Making and Receiving Calls Making a call Receiving a call Hanging up Adjusting the Earpiece Volume Temporarily Mute Ringer Tone Dialing Switch-over Traveling Out-of-Range Selecting a Different Channel Find Handset Using Call Waiting Voice Mail Waiting Indicator RocketDial Storing the RocketDial Using the Speed Dial Memory Storing Names and Numbers in Speed Dial Memory If you make a mistake while entering a name Page Storing Caller ID messages in Speed Memory Locations Making Calls from Speed Dial Memory To cancel speed dialing Caller ID and CIDCW (Caller ID on Call Waiting) When the Telephone Rings Viewing the Caller ID Message List Deleting Information from the Caller ID List Deleting a Caller ID message Deleting all Caller ID names/numbers Making a Call from the Caller ID List Changing the Digital Security Code Note on Power Sources Low battery alert Battery replacement and handling Cleaning the battery charging contacts General Information Troubleshooting If your phone is not performing to your expectations, please try these simple steps first. Page Liquid Damage ADDITIONAL INFORMATION [39] UP033BH_EXI7246C.book 39 Precautions! INFORMATION ADDITIONAL Rechargeable Nickel-Metal-Hydride Battery Warning Rechargeable Nickel-Cadmium Batteries Must Be Recycled or Disposed of Properly [40] ADDITIONAL INFORMATION UP033BH_EXI7246C.book 40 Telephone Line Problems ADDITIONAL INFORMATION Radio Interference I.C. Notice TERMINAL EQUIPMENT RADIO EQUIPMENT Index Memory List Page ? 1-800-874-9314 (V/TTY)