Uniden EXI7246C !

GETTING STARTED [9]

www.uniden.com

C. Connect the Base Unit and Charge the Handset

1) Connect the AC adapter to the DC IN 9V jack and to

a standard 120V AC wall outlet.

2) Place the handset in the base unit with the keypad

facing forward.

3) Make sure the charge/in use LED illuminates.

If the LED does not illuminate, check to see that the AC

adapter is plugged in and the handset makes good

contact with the base charging contacts.

• Connect the AC adapter to a continuous power

supply.

• Place the base unit close to the AC outlet so that

you can unplug the AC adapter easily.

4) Charge your handset at least 15-20 hours before

plugging into the phone line.

5) Once the handset battery pack is fully charged,

connect the telephone line cord to the TEL

LINE jack and a telephone outlet.

If your telephone outlet isn't modular, contact

your telephone company for assistance.

Route the cord.

Route the cord.

Route the cord.

Modular

•Use only the supplied

AD-0001 AC adapter.

Do not use any other

AC adapter.

•Do not place the power

cord where it creates a

trip hazard or where it

could become chafed

and create a fire or

electrical hazard.

!

GETTING STARTED

UP033BH_EXI7246C.book 9 ページ２００４年１月１５日　木曜日　午前１１時４７分

Contents

Main Page QUICK REFERENCE GUIDE [1] QUICK REFERENCE GUIDE Step 4 Charging the Handset EXI7246/EXI7246C Step 2 Install Handset Battery Pack and Charge Step 1 Checking the Package Contents Step 3 Set up the Base Step 5 Connect to the Phone Line [2] QUICK REFERENCE GUIDE Contents Basics RocketDial Using the Speed Dial Memory Caller ID Features Welc ome Featu res Controls and Functions Terms Used in this Manual Installing the Phone Do the following steps: A. Choose the Best Location B. Install the Rechargeable Battery Pack into the Handset ! C. Connect the Base Unit and Charge the Handset ! D. Mount the base unit on a wall Standard wall plate mounting Direct wall mounting Installing the Beltclip Headset Installation Basic Setup Activating AutoTalk Activating Caller ID on Call Waiting Entering Your Area Code Choosing the Dialing Mode Setting the Language Page Using Your Phone Making and Receiving Calls Making a call Receiving a call Hanging up Adjusting the Earpiece Volume Temporarily Mute Ringer Tone Dialing Switch-over Traveling Out-of-Range Selecting a Different Channel Find Handset Using Call Waiting Voice Mail Waiting Indicator RocketDial Storing the RocketDial Using the Speed Dial Memory Storing Names and Numbers in Speed Dial Memory If you make a mistake while entering a name Page Storing Caller ID messages in Speed Memory Locations Making Calls from Speed Dial Memory To cancel speed dialing Caller ID and CIDCW (Caller ID on Call Waiting) When the Telephone Rings Viewing the Caller ID Message List Deleting Information from the Caller ID List Deleting a Caller ID message Deleting all Caller ID names/numbers Making a Call from the Caller ID List Changing the Digital Security Code Note on Power Sources Low battery alert Battery replacement and handling Cleaning the battery charging contacts General Information Troubleshooting If your phone is not performing to your expectations, please try these simple steps first. Page Liquid Damage ADDITIONAL INFORMATION [39] UP033BH_EXI7246C.book 39 Precautions! INFORMATION ADDITIONAL Rechargeable Nickel-Metal-Hydride Battery Warning Rechargeable Nickel-Cadmium Batteries Must Be Recycled or Disposed of Properly [40] ADDITIONAL INFORMATION UP033BH_EXI7246C.book 40 Telephone Line Problems ADDITIONAL INFORMATION Radio Interference I.C. Notice TERMINAL EQUIPMENT RADIO EQUIPMENT Index Memory List Page ? 1-800-874-9314 (V/TTY)