Choosing the Dialing Mode
Most phone systems use tone dialing. However some phone systems (such as in rural areas) still use pulse dialing. Your Uniden phone supports both tone and pulse dialing. The default setting is tone dialing. If your phone system uses pulse dialing, follow the steps below to change the dialing mode:
1) When the phone is in standby mode, press and hold the caller id/ menu key. The following screen appears.
2) Press the 
/vol/ 
key three times to select Dial.
3) Press the select key to set the phone to pulse dialing.
4)Press the end key to complete the setting. The handset returns to standby mode.
Setting the Language
There are three languages to choose from; English, French and Spanish.
1) When the phone is in standby mode, press and hold the caller id/ menu key. The following screen appears.
2) Press the 
/vol/ 
key four times to select Language.
3) Press the select key to select Eng, Fr. or Esp.
4) Press the end key to complete the setting. The handset returns to standby mode.
note 
•If you are not sure of your dialing system, make a trial call. If the call connects, leave the setting as is. Otherwise, set for pulse dialing.
•If your phone system requires pulse dialing and you need to send DTMF tones during a call, you can temporarily switch over to tone dialing. (Refer to “Tone Dialing
G E T T I N G S T A R T E D
w w w . u n i d e n . c o m | G E T T I N G S T A R T E D [ 1 5 ] |
