Charging the battery pack

The plastic connectors will fit together only one way. Make sure the battery’s connector is properly alighned. Use only the Uniden Battery pack (model BT-905) supplied with your phone.

Charge the battery pack for 12-15 hours before you start using your phone.

1	Press the battery cover release.
2	Connect the battery pack
	connector with the correct
	polarity (black and red wires),
	then insert the battery pack
Black	into the battery compartment.
Red
3	Slide the battery cover forward
	until it snaps into place.

4 Place the handset on the base. Make sure that the “status” LED of the base unit lights, and charging begins. Charge the battery for at least 12-15 hours. You can place either side up for charging the battery.

status LED

Page 13

Image 13

Uniden EXL 8900 manual Charging the battery pack, Into the battery compartment, Slide the battery cover forward

Contents

Page Welcome Features Talk Long Dst Controls and functions 28 29 Contents Read this first Next, choose the best location to set up the base unitBase unit Handset Checking the package contents Choose the best location Setting up the base unit Connect the base unit If you want to install the base unit on the wall, see If your dialing system is Set the switch to Tone Choose the dialing modeContact your telephone company for Assistance Pulse Snap the wall mount Molded wiringAdapter into Notches on the base Direct wall plate mounting Into the battery compartment Charging the battery packSlide the battery cover forward Until it snaps into place When the battery charge becomes low Battery use time per chargeCleaning the battery contacts Do not use any liquids or solvents » Ringer Tone and Volume Adjusting the volume controlThis switch turns the handset ringer on or off » Setting the Handset Earpiece Volume Making and receiving calls Using the LDM Long Distance Manager Entering a pause in memory dialing Storing a number in memoryFollow the remaining steps in the Storing a Number in Memory section to complete Dialing a stored number Storing mixed tone/pulse number Press mem twice Dial the main number Selecting a different channel Using the flash buttonAgain to return to the previous call Page/find MuteTraveling out-of-range Muting the ringer sound Changing the digital security code Additional Information Headset installation Installing the beltclipTo attach the beltclip To remove the beltclip Battery replacement and handling Maintenance Symptom Suggestion Troubleshooting General SpecificationsBase unit Handset K, L IndexW, X, Y, Z

Charging the battery pack

into the battery compartment.

Slide the battery cover forward

until it snaps into place.

status LED