Place the power cord so it does not create a trip hazard, or where it could become chafed and create a fire or electrical hazard.
Connect the base unit
If you want to install the base unit on the wall, see page 8.
Route the cord.
2
To AC outlet
To DC IN 9V
AC adapter
1 (supplied) To telephone outlet
Telephone line cord (supplied)
To TEL LINE
Use only the Uniden AC adapter supplied with this phone. Do NOT use an outlet controlled by a wall switch.
1 Connect the telephone line cord to the TEL LINE jack and to a telephone outlet.
2 Connect the AC adapter to the DC IN 9V jack and to a standard 120VAC wall outlet.
3 Set the base unit on a desk or tabletop and place the handset on the base unit.
Then raise the antenna to a vertical position.
6
