Maintenance, Battery replacement and handling | Uniden EXL 8900

Note on power sources

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery.

With normal usage, your battery should last about one year.

Please contact your place of purchase for a replacement battery.

Power Failure

During the period that the power is off, you will not be able to make or receive calls with the telephone.

RECYCLING NICKEL- CADMIUM BATTERIES

NICKEL-

CADMIUM

BATTERIES

MUST BE

DISPOSED OF

Ni-CdPROPERLY.

Nickel-cadmium cells are used in the battery pack. Please take your used nickel- cadmium battery packs to a store that recycles nickel- cadmium batteries.

Caution

•Use the specified battery pack.

•Do not remove the battery from the handset to charge it.

•Never throw the battery into a fire, disassemble it, or heat it.

•Do not remove or damage the battery casing.

Maintenance

When slightly dirty

Wipe with a soft, dry cloth.

When very dirty

Wipe with a soft cloth that has been dampened with diluted, neutral detergent. Dry with a dry cloth.

When the charging terminals become dirty

Wipe with a pencil eraser or other contact cleaner.

Caution

Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.

22

Image 25

Uniden EXL 8900 manual Maintenance, Battery replacement and handling

Contents

Page Welcome Features Talk Long Dst Controls and functions 28 29 Contents Read this first Next, choose the best location to set up the base unitBase unit Handset Checking the package contents Choose the best location Setting up the base unit Connect the base unit If you want to install the base unit on the wall, see If your dialing system is Set the switch to Tone Choose the dialing modeContact your telephone company for Assistance Pulse Snap the wall mount Molded wiringAdapter into Notches on the base Direct wall plate mounting Into the battery compartment Charging the battery packSlide the battery cover forward Until it snaps into place When the battery charge becomes low Battery use time per chargeCleaning the battery contacts Do not use any liquids or solvents » Ringer Tone and Volume Adjusting the volume controlThis switch turns the handset ringer on or off » Setting the Handset Earpiece Volume Making and receiving calls Using the LDM Long Distance Manager Entering a pause in memory dialing Storing a number in memoryFollow the remaining steps in the Storing a Number in Memory section to complete Dialing a stored number Storing mixed tone/pulse number Press mem twice Dial the main number Selecting a different channel Using the flash buttonAgain to return to the previous call Page/find MuteTraveling out-of-range Muting the ringer sound Changing the digital security code Additional Information Headset installation Installing the beltclipTo attach the beltclip To remove the beltclip Battery replacement and handling Maintenance Symptom Suggestion Troubleshooting General SpecificationsBase unit Handset K, L IndexW, X, Y, Z