Battery use time per charge | Uniden EXLI 8962 manual

Low Battery

Step 3 (continued)

Battery use time (per charge)

From fully charged

•Seven hours coutinuous use.

•Seven days when the handset is in the standby mode.

When the battery charge becomes low

When the voltage of battery pack in the handset is very low and needs to be charged, the phone is pro- grammed to eliminate functions in order to save power. If the phone is not in use, "Low Battery"

flashes and none of the keys will operate. If the phone is in use, "Low Battery" flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging.

Notes

•Even when the battery pack is not being used, it will gradually discharge over a long period. For optimum performance, be sure to return the handset to the base unit after a telephone call for charging the battery.

•The built-in memory backup can hold numbers and names stored in the memory for up to 2 minutes, while you replace the battery pack.

•If you must replace the battery pack during a telephone call, complete the replacement of the battery pack within 30 seconds, and you may return to the original call.

•Rechargeable batteries have a memory effect that reduces standby and talk time.

To avoid this memory effect, on a monthly basis, use the phone until the

"Low Battery" indication appears. Then charge the battery for 15 hours.

Cleaning the battery contacts

To maintain a good charge, it is important to clean all battery contacts on the handset and base unit about once a month. Use a soft cloth or other contact cleaner.

Do not use any liquids or solvents.

10

Image 10

Uniden EXLI 8962 Battery use time per charge, When the battery charge becomes low, Cleaning the battery contacts

Contents

Exli Features Introduction Table of contents 6 to Next, choose the best location to set up the base unitRead this first 9 to10 Checking the package contents Step Setting up the base unit Choose the best location If you want to install the base unit on the wall, see Connect the base unit Choose the dialing mode ToneTONE PulsePULSE Preparing the battery pack This position lets you see Caller ID messages on the display When the battery charge becomes low Battery use time per chargeCleaning the battery contacts Entering your area code On-hook dialing Making callsPress talk . Talk flashes on the display Off-hook dialing Mute featureThen the volume setting is displayed Dial the phone number On-hook redialing RedialingLast three phone numbers dialed can be quickly redialed Off-hook redialing Press talk Talk appears flashing on the display Mute when ringing Auto Talk when ringingAny key when ringing Any key when paging Ear Speaker volume Ringer switchRinger tone Storing phone numbers and names Memory storingPress and hold mem until Memory Store is displayed Redial/p keys to enter the phone number Number is displayed. The cursorAfter about 2 seconds, Memory Store is displayed Making calls with memory dialing Memory dialingOn-hook dialing Off-hook dialing Display a Programmed Number Memory editing Editing Stored name and/or phone number After about 2 seconds, Memory Press mem to exit edit modeDisplayed Memory erasing Erasing a stored name and phone number On-hook dial editing Deleting a phone number Off-hook mute MuteLDM Long Distance Manager Bell in mute LongDst appears and remains on LDM On-hook dialingLongDst flashes on the display Do not use Off-hook redialing LDM Off-hook dialingOff-hook dialing Off-hook memory dialing LDM Private Branch Exchange PBX dialing To locate the handset PagingPress any key on the handset to end Caller ID Caller ID serviceSetting Caller ID options Press ¥or »to move the cursor to the item that is to be set When the telephone rings Here are some typical displays Long Distance call settings and cancellation Viewing the Caller ID Message list Press del Deleting information from the Caller ID listDeleting a Caller ID message Press ¥or »to select Yes or Deleting all Caller ID name/numbers Display returns to the summary screen Long Distance calls Using the Caller ID listCalling a party from the Caller ID list Select the phone number that you want to dial. See If a message has already been stored in the select Storing Caller ID messages in Memory dialingPress mem Ed memory numbers location, a verification screen Using Caller ID with call waiting service Additional information Changing the digital security code Mounting the base unit on a wall Standard wall plate mounting Retainer out of the slot. Rotate it clock Direct wall plate mountingOn the base unit, pull the handset Wise 180 degrees Headset installation Installing the beltclipTo attach the beltclip To remove the beltclip Power Failure MaintenanceBattery replacement and handling Wipe with a soft, dry cloth Troubleshooting To help eliminate background Base unit SpecificationsGeneral Handset Index W, X, Y, Z Additional Information Uniden America Corporation