Maintenance, Battery replacement and handling | Uniden EXLI 8962

Additional information

Note on power sources

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery.

With normal usage, your battery should last about one year.

Please contact your place of purchase for a replacement battery.

RECYCLING NICKEL-CADMIUM BATTERIES

NICKEL-CADMIUM

BATTERIES MUST BE

DISPOSED OF

PROPERLY.

Ni-Cd

Nickel-cadmium cells are used in the bat- tery pack. Please take your used nickel- cadmium battery packs to a store that recycles nickel-cadmium batteries.

Power Failure

During the period that the power is off, you will not be able to make or receive calls with the telephone.

Caution

•Use the specified battery pack.

•Do not remove the battery from the handset to charge it.

•Never throw the battery into a fire, disassemble it, or heat it.

•Do not remove or damage the battery casing.

Maintenance

When slightly dirty

Wipe with a soft, dry cloth.

When very dirty

Wipe with a soft cloth that has been dampened with diluted, neutral deter- gent. Dry with a dry cloth.

When the charging terminals become dirty

Wipe with a pencil eraser or other contact cleaner.

Caution

Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.

Additional Information

43

Image 43

Uniden EXLI 8962 owner manual Maintenance, Battery replacement and handling, Power Failure, Wipe with a soft, dry cloth

Contents

Exli Introduction Features Table of contents 9 to10 Next, choose the best location to set up the base unitRead this first 6 to Step Checking the package contents Choose the best location Setting up the base unit Connect the base unit If you want to install the base unit on the wall, see ToneTONE PulsePULSE Choose the dialing mode This position lets you see Caller ID messages on the display Preparing the battery pack When the battery charge becomes low Battery use time per chargeCleaning the battery contacts Entering your area code On-hook dialing Making callsPress talk . Talk flashes on the display Dial the phone number Mute featureThen the volume setting is displayed Off-hook dialing On-hook redialing RedialingLast three phone numbers dialed can be quickly redialed Press talk Talk appears flashing on the display Off-hook redialing Any key when paging Auto Talk when ringingAny key when ringing Mute when ringing Ear Speaker volume Ringer switchRinger tone Storing phone numbers and names Memory storingPress and hold mem until Memory Store is displayed Redial/p keys to enter the phone number Number is displayed. The cursorAfter about 2 seconds, Memory Store is displayed Making calls with memory dialing Memory dialingOn-hook dialing Display a Programmed Number Off-hook dialing Editing Stored name and/or phone number Memory editing After about 2 seconds, Memory Press mem to exit edit modeDisplayed Erasing a stored name and phone number Memory erasing Deleting a phone number On-hook dial editing Bell in mute MuteLDM Long Distance Manager Off-hook mute Do not use LDM On-hook dialingLongDst flashes on the display LongDst appears and remains on Off-hook memory dialing LDM Off-hook dialingOff-hook dialing Off-hook redialing LDM Private Branch Exchange PBX dialing To locate the handset PagingPress any key on the handset to end Press ¥or »to move the cursor to the item that is to be set Caller ID serviceSetting Caller ID options Caller ID Here are some typical displays When the telephone rings Viewing the Caller ID Message list Long Distance call settings and cancellation Press ¥or »to select Yes or Deleting information from the Caller ID listDeleting a Caller ID message Press del Display returns to the summary screen Deleting all Caller ID name/numbers Select the phone number that you want to dial. See Using the Caller ID listCalling a party from the Caller ID list Long Distance calls Ed memory numbers location, a verification screen Storing Caller ID messages in Memory dialingPress mem If a message has already been stored in the select Using Caller ID with call waiting service Changing the digital security code Additional information Standard wall plate mounting Mounting the base unit on a wall Wise 180 degrees Direct wall plate mountingOn the base unit, pull the handset Retainer out of the slot. Rotate it clock Headset installation Installing the beltclipTo attach the beltclip To remove the beltclip Wipe with a soft, dry cloth MaintenanceBattery replacement and handling Power Failure To help eliminate background Troubleshooting Handset SpecificationsGeneral Base unit W, X, Y, Z Index Additional Information Uniden America Corporation