Step 3

Preparing the battery pack

Charge the battery pack for more than 12 hours before you start using your phone.

1 Press and slide the battery compartment cover toward the bottom of the unit.

2 Connect the battery pack connector with the correct polarity (black and red wires), then insert the battery pack into the battery compartment.

Black

Red

3 Securely close the battery compartment cover by sliding it up until it snaps into place.

4 Place the handset on the base unit with the keys and display facing upward.

Getting Started

status lamp

This position lets you see Caller ID messages on the display.

￿

￿

Total:00

When the handset has been properly placed on the charging terminals of the base unit, the "status" lamp of the base unit lights and charging begins. Charge the battery for at least 15 hours.

You can place either side up for charg- ing the battery.

9

Page 9
Image 9
Uniden EXLI 8962 owner manual Preparing the battery pack, This position lets you see Caller ID messages on the display