Direct wall plate mounting, Wise 180 degrees | Uniden EXLI 8962

Additional information

Handset retainar	7 On the base unit, pull the handset
	retainer out of the slot. Rotate it clock-
	wise 180 degrees.

8 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the oval is down. The retainer holds the handset in place,

[Direct wall plate mounting]

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location. That could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

TOP

3/16 in.

3-15/16 in.

1 Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screwheads for mounting the phone.

2 Refer to steps 1 through 8 on page 39 to mount the telephone.

Additional Information

41

Image 41

Uniden EXLI 8962 Direct wall plate mounting, On the base unit, pull the handset, Retainer out of the slot. Rotate it clock

Contents

Exli Introduction Features Table of contents Read this first Next, choose the best location to set up the base unit6 to 9 to10 Step Checking the package contents Choose the best location Setting up the base unit Connect the base unit If you want to install the base unit on the wall, see ToneTONE PulsePULSE Choose the dialing mode This position lets you see Caller ID messages on the display Preparing the battery pack Cleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Entering your area code Press talk . Talk flashes on the display Making callsOn-hook dialing Then the volume setting is displayed Mute featureOff-hook dialing Dial the phone number Last three phone numbers dialed can be quickly redialed RedialingOn-hook redialing Press talk Talk appears flashing on the display Off-hook redialing Any key when ringing Auto Talk when ringingMute when ringing Any key when paging Ringer tone Ringer switchEar Speaker volume Press and hold mem until Memory Store is displayed Memory storingStoring phone numbers and names After about 2 seconds, Memory Store is displayed Number is displayed. The cursorRedial/p keys to enter the phone number On-hook dialing Memory dialingMaking calls with memory dialing Display a Programmed Number Off-hook dialing Editing Stored name and/or phone number Memory editing Displayed Press mem to exit edit modeAfter about 2 seconds, Memory Erasing a stored name and phone number Memory erasing Deleting a phone number On-hook dial editing LDM Long Distance Manager MuteOff-hook mute Bell in mute LongDst flashes on the display LDM On-hook dialingLongDst appears and remains on Do not use Off-hook dialing LDM Off-hook dialingOff-hook redialing Off-hook memory dialing LDM Private Branch Exchange PBX dialing Press any key on the handset to end PagingTo locate the handset Setting Caller ID options Caller ID serviceCaller ID Press ¥or »to move the cursor to the item that is to be set Here are some typical displays When the telephone rings Viewing the Caller ID Message list Long Distance call settings and cancellation Deleting a Caller ID message Deleting information from the Caller ID listPress del Press ¥or »to select Yes or Display returns to the summary screen Deleting all Caller ID name/numbers Calling a party from the Caller ID list Using the Caller ID listLong Distance calls Select the phone number that you want to dial. See Press mem Storing Caller ID messages in Memory dialingIf a message has already been stored in the select Ed memory numbers location, a verification screen Using Caller ID with call waiting service Changing the digital security code Additional information Standard wall plate mounting Mounting the base unit on a wall On the base unit, pull the handset Direct wall plate mountingRetainer out of the slot. Rotate it clock Wise 180 degrees To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Battery replacement and handling MaintenancePower Failure Wipe with a soft, dry cloth To help eliminate background Troubleshooting General SpecificationsBase unit Handset W, X, Y, Z Index Additional Information Uniden America Corporation