If you have not recorded your personal outgoing message when you turn the answering system on, the preset message is automatically set. To set your personal message, see page 24.
Setting up your answering system Turning the answering system on/off
1 To turn the answering system on, press answer on/off . A tone will sound and
the current greeting message is played.
backupopen | 2 To turn the answering system off, press |
battery | |
| |
| answer on/off again. |
Setting the clock
The clock on EXS 9950 Answer System starts when power is applied to the base. Follow these steps to set the clock to the correct time.
Press skip 
or
repeat 
multiple times to scroll through days, hours, minutes, etc.
backupopen battery
1 Press and hold clock until a tone sounds.
2 First, press skip 
or repeat until the correct day of the week is announced. (Number 
through 
displays on the base as each day is announced.) Press clock again to select the day.
skip/ 
If you don't set the clock within two minutes, the system returns to standby.
3 | Next, press | skip | or | repeat |
| until you hear the correct | |||
| hour setting. Numbers through |
| display on the base as each | ||||||
| hour is announced. Press | clock | again to select the correct time. | ||||||
4 | Press | skip | or | repeat |
| until you hear the correct time | |||
| setting. Numbers | through | display on the base as each | ||||||
| minute is announced. Press | clock | again to select the correct | ||||||
| time. |
|
|
|
|
|
|
|
|
5 | The LED displays an | or | . Press | skip | or repeat | ||||
| until you hear the correct AM/PM setting. |
| |||||||
6 | Press | clock | again to end the time/day setting. | ||||||
| The EXS 9950 announces the time that you have set. | ||||||||
23
