Selecting the message record time | Uniden EXS 9950 specs

Selecting the message record time

You can set your answering system to record messages up to one or four minutes long.

One minute option: move the REC TIME switch to 1.

Four minutes option: move the REC TIME switch to 4.

»Announce only feature:

backupopen battery

REC TIME

ANN/4/1

The announce only feature plays an outgoing message, but it will not allow the caller to leave a message. Move the REC TIME switch to the ANN position.

The message counter LED displays “ ” when system is on standby.

Prerecorded outgoing message for Announce only feature is:

"Hello, no one is available to take your call."

Selecting a PIN code

To play your messages from a remote location, you will need to enter a two-digit Personal Identification Number (PIN) code (00-99). To select a PIN, perform the following steps.

Press skip or

repeat multiple times to scroll through numbers on the display.

backupopen battery

1

2

skip/

3

On the base, press and hold pin button until a tone sounds and the LED displays .

To set the first number, press

skip or repeat to scroll from 0 to 9. When the desired number appears in the display, press

pin . This selects the first number.

To set the second number, press

skip or repeat to scroll from 0 to 9. When the desired number appears in the display, press

pin . This selects the second number and then the entered number is announced.

25

Image 28

Uniden EXS 9950 manual Selecting the message record time, Selecting a PIN code, » Announce only feature

Contents

Page Features Introduction Controls and functions 29 30 31 32 42 43 44 Contents Base unit Read this firstHandset Checking the package contents Setting up the base Choose the best location If you want to install the base unit on the wall, see Connect the base unit Choose the dialing mode If your dialing system is Set the switch to TonePulse If you arent sure of your dialing system Mounting the base unit on a wall Standard wall plate mounting Direct wall plate mounting Installing the handset battery pack Charging optional battery packs Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contacts Automatic digital code security Making a call Other Operations Receiving a call From the handsetFrom the base Handset on the base Adjusting the ringer and earpiece volume Flash and Call Waiting Redialing a call Mute Storing phone numbers Making calls with memory dialing Memory dialing One-touch memory dialing Erasing a stored phone number Using page feature When speaking on the base When speaking on the handsetWay conferencing Integrated Integrated answering device Setting the clock To turn the answering system off, press Setting your greeting » Preset Message» Recording your personal outgoing message Greeting » Choosing between the two outgoing messages Selecting the message record time » Announce only featureSelecting a PIN code Setting ring time switch Ring time/toll saver switch Allows you to set the number Using your answering system Playing your messages Repeating a message Skipping a message Deleting a message Voice memo» Deleting individual message » Deleting all messages Recording a conversation Remote access away from home Command Function Remote room monitor Installing the beltclip Headset installationTo attach the beltclip To remove the beltclip Maintenance Battery replacement and handling Troubleshooting Symptom Suggestion Symptom Suggestion Specifications GeneralBase unit Handset K, L IndexW, X, Y, Z