Flash and Call Waiting | Uniden EXS 9950 specs

Flash and Call Waiting

	If you have “Call Waiting” service and a call
	waiting tone sounds while you are on a call,
	press flash	to accept the waiting call.
flash	There is a short pause, then you will hear
	the new caller. To return to the original
	caller, press	flash again.

Adjusting the ringer and earpiece volume

Handset ringer tone

The phone has four types of ringer tone. In the standby mode, press flash and one of 1 - 4 .

¥

flash

»

Handset ringer volume

1

3

In the standby mode, press ¥for high and »for low.

To turn off the ringer, set the ringer on/off switch to off.

42

	ringer
off	on
	on

	ringer
off	on
	on

Handset earpiece volume

The phone has four earpiece volume levels, Normal, Medium, High, and Loud. Pressing ¥or »during a telephone call will change the earpiece volume of the handset. This setting will remain in effect after the telephone call has ended.

When you press ¥in Hac mode or press »in Normal mode, error sound beeps.

Base ringer switch	RINGER
This switch turns the base	OFF–ON
ringer on or off.

15

Image 18

Uniden EXS 9950 manual Flash and Call Waiting, Adjusting the ringer and earpiece volume

Contents

Page Features Introduction Controls and functions 29 30 31 32 42 43 44 Contents Read this first Base unitHandset Checking the package contents Setting up the base Choose the best location If you want to install the base unit on the wall, see Connect the base unit Pulse Choose the dialing modeIf your dialing system is Set the switch to Tone If you arent sure of your dialing system Mounting the base unit on a wall Standard wall plate mounting Direct wall plate mounting Installing the handset battery pack When the battery charge becomes low Charging optional battery packsBattery use time per charge Cleaning the battery contacts Automatic digital code security Making a call Other Operations From the base Receiving a callFrom the handset Handset on the base Adjusting the ringer and earpiece volume Flash and Call Waiting Redialing a call Mute Storing phone numbers Making calls with memory dialing Memory dialing One-touch memory dialing Erasing a stored phone number Using page feature When speaking on the handset When speaking on the baseWay conferencing Integrated Integrated answering device Setting the clock To turn the answering system off, press » Recording your personal outgoing message Greeting Setting your greeting» Preset Message » Choosing between the two outgoing messages » Announce only feature Selecting the message record timeSelecting a PIN code Setting ring time switch Ring time/toll saver switch Allows you to set the number Using your answering system Playing your messages Repeating a message Skipping a message » Deleting individual message Deleting a messageVoice memo » Deleting all messages Recording a conversation Remote access away from home Command Function Remote room monitor To attach the beltclip Installing the beltclipHeadset installation To remove the beltclip Maintenance Battery replacement and handling Troubleshooting Symptom Suggestion Symptom Suggestion Base unit SpecificationsGeneral Handset Index K, LW, X, Y, Z