Installing the handset battery pack
Charge the battery pack for more than 17 hours before you start using your phone.
1 Press in on the battery cover release and slide the cover down until it comes off.
2 Install the
Label face | 3 Slide the battery cover on |
| |
| until it snaps into place. |
4 Place the handset on the base.
5 Make sure that the “status” LED lights. If the LED
doesn’t light, check to see
that the AC adapter is
plugged in and that the
status LEDhandset makes good contact with the base charging contacts.
Use only Uniden Battery
10
