Storing phone numbers and names, Memory Store | Uniden EXS 9960

1 Press and hold

Storing phone numbers and names

Memory Dialing allows you to dial a number using just a few key strokes. You can store up to 20 phone numbers in the memory.

In memory dialing operation, you must press a key within 20 seconds or the phone will return to standby. If you return the handset in the cradle the phone will return to standby too.

FEATURES

del

#/ 1

*/tone/0 redial/p

mem until

“Memory Store” is displayed.

Memory Store

01

2	Press	»and ¥or enter a two-
	digit number (01 - 20) to select the
	memory location where you would
	like to store the number.
3	Press	select .

The following screen appears and a cursor flashes indicating that the display is ready for the name to be entered.

Store Name

TELEPHONE

If this screen appears, the selected memory location is already stored. Then you must either change the entry in this location, clear the location or select “Go Back” to choose another location.

Edit Memory07

Delete Memory07

Go Back

4 Use the ¥, », or del keys to enter the name. The name cannot exceed 13 characters.

• Use the ¥and »key to scroll through the character menu. It contains upper and lower case letters and various characters.

• Use	#/ 1 and */tone/0 to move the cursor to the
desired location.
• Use	del key to delete characters as needed.

18

Image 21

Uniden EXS 9960 manual Storing phone numbers and names, Memory Store, Store Name, Edit Memory07 Delete Memory07 Go Back

Contents

Page Introduction Features Talk Flash Controls and functions 29 30 Contents 5 to Read this first10 to11 About the digital security code Checking the package contents Choose the best location Setting up the base unit Connect the base unit If you want to install the base unit on the wall, see If your dialing system is Set the switch to Tone Choose the dialing modePulse If you arent sure of your dialing system DC in 9V jack Direct wall plate mounting Preparing the battery pack Battery use time per charge Charging optional battery packsWhen the battery charge becomes low Cleaning the battery contacts On-hook dialing Making a callExample Other Operations Talk High Off-hook dialingTalk 017 1003 Any key answer when ringing AutoTalk when ringingReceiving a call Call Waiting Ringer volume Adjusting the ringer and earpiece volumeEarpiece volume Ringer High On-hook redialing Redialing a callRedial2 Redial3 Off-hook redialing Memory Store Storing phone numbers and namesStore Name Edit Memory07 Delete Memory07 Go Back Memory07 Stored Store Number Making calls with memory dialing On-hook memory dialingDisplay a Programmed Number Off-hook memory dialing Talk Talk HighTalk 035 Memory Store 01 Uniden Corp 02 John DOE Editing a stored name and/or phone number Memory Store is Memory01 Stored Erasing a stored name and phone number Paging Handset beeps for 5 secondsFollowing screen appears When speaking on the handset When phone is ringingMute Caller ID Setting Caller ID optionsAuto TalkOff Area Code When the telephone rings 11 1230PM813-8 3300 Viewing the Caller ID Message list Long Distance call setting and cancellationNew Total02 17 1230PM Uniden Corp When the pointer is at No When the pointer is at YesDeleting information from the Caller ID list Deleting a Caller ID message Deleting all Caller ID name/numbers Delete All ? YesTotal00 Calling a party from the Caller ID list Using the Caller ID listLong Distance calls Dial edit Select Location Storing Caller ID messages in Memory dialing Talk Uniden Corp Using Caller ID on call waiting service Unit. Press and hold Changing the digital security code Installing the beltclip Headset installationTo attach the beltclip To remove the beltclip Maintenance Battery replacement and handlingPower Failure Symptom Suggestion Troubleshooting General SpecificationsBase unit Handset Index K, LV, W, X, Y, Z Page