Setting up the base unit | Uniden EXS 9960 specs

Setting up the base unit

Do the following steps.

•Choose the best location

•Connect the base unit

•Choose the dialing mode

Choose the best location

Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure. Here are some important guidelines you should consider:

Avoid heat sources, such as radiators, air ducts, and sunlight

Avoid television sets and other electronic equipment

Choose a central location

Avoid noise sources such as a window by a street with heavy traffic

Avoid microwave ovens

Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shock

Avoid personal computers

Avoid other cordless telephones

•You should charge your handset for more than 17 hours before using the phone.

•The location should be close to both a phone jack and a continuous power outlet which is not switchable.

•Keep the base and handset away from sources of electrical noise such as motors and fluorescent lighting.

•Be sure there is sufficient space to raise the base antenna fully vertical.

•The base can be placed on a desk, tabletop or mounted on a standard wall plate.

5

Image 8

Uniden EXS 9960 manual Setting up the base unit, Choose the best location

Contents

Page Features Introduction Controls and functions Talk Flash 29 30 Contents Read this first 5 to10 to11 About the digital security code Checking the package contents Setting up the base unit Choose the best location If you want to install the base unit on the wall, see Connect the base unit Choose the dialing mode If your dialing system is Set the switch to TonePulse If you arent sure of your dialing system DC in 9V jack Direct wall plate mounting Preparing the battery pack Charging optional battery packs Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contacts Making a call On-hook dialingExample Other Operations Off-hook dialing Talk HighTalk 017 1003 AutoTalk when ringing Any key answer when ringingReceiving a call Call Waiting Adjusting the ringer and earpiece volume Ringer volumeEarpiece volume Ringer High Redialing a call On-hook redialingRedial2 Redial3 Off-hook redialing Storing phone numbers and names Memory StoreStore Name Edit Memory07 Delete Memory07 Go Back Store Number Memory07 Stored Display a Programmed Number Making calls with memory dialingOn-hook memory dialing Talk 035 Off-hook memory dialingTalk Talk High Editing a stored name and/or phone number Memory Store 01 Uniden Corp 02 John DOE Memory01 Stored Memory Store is Erasing a stored name and phone number Following screen appears PagingHandset beeps for 5 seconds Mute When speaking on the handsetWhen phone is ringing Setting Caller ID options Caller IDAuto TalkOff Area Code 813-8 3300 When the telephone rings11 1230PM Long Distance call setting and cancellation Viewing the Caller ID Message listNew Total02 17 1230PM Uniden Corp When the pointer is at Yes When the pointer is at NoDeleting information from the Caller ID list Deleting a Caller ID message Total00 Deleting all Caller ID name/numbersDelete All ? Yes Using the Caller ID list Calling a party from the Caller ID listLong Distance calls Dial edit Storing Caller ID messages in Memory dialing Select Location Using Caller ID on call waiting service Talk Uniden Corp Changing the digital security code Unit. Press and hold To attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Power Failure MaintenanceBattery replacement and handling Troubleshooting Symptom Suggestion Specifications GeneralBase unit Handset V, W, X, Y, Z IndexK, L Page