Erasing a stored name and phone number | Uniden EXS 9960 specification

Erasing a stored name and phone number

1 Press and hold mem until the display shows the memory screen and any saved name/number.

2

del

3

Memory Store 01 UNIDEN CORP 02 JOHN DOE

Press »and ¥keys or enter a two-digit number (01 - 20) to select the memory location you would like to edit.

Memory Store 01 UNIDEN CORP 02 JOHN DOE

Press select .

The following screen appears with the memory location number that you have selected in the display.

Edit Memory02

Delete Memory02

Go Back

4	Press »to move the cursor	Edit Memory02
	down to “Delete Memory”	Delete Memory02
	command line.	Go Back
5	Press select . The following	Delete Memory02?
5	Press select . The following	Yes
	confirmation screen appears.	Yes
	confirmation screen appears.	No
		No
6	Press ¥to move the cursor to “Yes”.
7	Press select or del .
	There is a confirmation tone	Memory02 Deleted
	and the entry is deleted. The	Memory02 Deleted
	and the entry is deleted. The
	following screen appears.
8	After a few seconds the display	Memory Store
	returns to the	02
	“Memory Store” screen.	03 MOM AND DAD
	You may select another number
	to delete (return to step 2) or press mem to return to		24
	standby.		24

Image 27

Uniden EXS 9960 manual Erasing a stored name and phone number

Contents

Page Introduction Features Talk Flash Controls and functions 29 30 Contents About the digital security code Read this first5 to 10 to11 Checking the package contents Choose the best location Setting up the base unit Connect the base unit If you want to install the base unit on the wall, see If you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone Pulse DC in 9V jack Direct wall plate mounting Preparing the battery pack Cleaning the battery contacts Charging optional battery packsBattery use time per charge When the battery charge becomes low Other Operations Making a callOn-hook dialing Example 1003 Off-hook dialingTalk High Talk 017 Call Waiting AutoTalk when ringingAny key answer when ringing Receiving a call Ringer High Adjusting the ringer and earpiece volumeRinger volume Earpiece volume Redial3 Redialing a callOn-hook redialing Redial2 Off-hook redialing Edit Memory07 Delete Memory07 Go Back Storing phone numbers and namesMemory Store Store Name Memory07 Stored Store Number Making calls with memory dialing On-hook memory dialingDisplay a Programmed Number Off-hook memory dialing Talk Talk HighTalk 035 Memory Store 01 Uniden Corp 02 John DOE Editing a stored name and/or phone number Memory Store is Memory01 Stored Erasing a stored name and phone number Paging Handset beeps for 5 secondsFollowing screen appears When speaking on the handset When phone is ringingMute Area Code Setting Caller ID optionsCaller ID Auto TalkOff When the telephone rings 11 1230PM813-8 3300 17 1230PM Uniden Corp Long Distance call setting and cancellationViewing the Caller ID Message list New Total02 Deleting a Caller ID message When the pointer is at YesWhen the pointer is at No Deleting information from the Caller ID list Deleting all Caller ID name/numbers Delete All ? YesTotal00 Dial edit Using the Caller ID listCalling a party from the Caller ID list Long Distance calls Select Location Storing Caller ID messages in Memory dialing Talk Uniden Corp Using Caller ID on call waiting service Unit. Press and hold Changing the digital security code Installing the beltclip Headset installationTo attach the beltclip To remove the beltclip Maintenance Battery replacement and handlingPower Failure Symptom Suggestion Troubleshooting Handset SpecificationsGeneral Base unit Index K, LV, W, X, Y, Z Page