10
Charge the battery pack for more than 17 hours before you start
using your phone.
1Press in on the battery cover
release and slide the cover
down until it comes off.
2Install the nickel-cadmium
battery with the label facing
down.
3Slide the battery cover on
until it snaps into place.
4Place the handset on the
base.
5Make sure that the

status

LED lights. If the LED
doesn’t light, check to see
that the AC adapter is
plugged in and that the
handset makes good contact
with the base charging
contacts.
open
backup battery
page/find
power
status
DIGITAL
SPREAD
SPECTRAM
900MHz
status
LED
Label face

Preparing the battery pack

Use only Uniden Battery (BT-999) supplied with your
phone.
EXS 9960 4th 99.8.20 4:06 PM Page 13