Storing Phone Numbers and Names
Memory Dialing allows you to dial a number using just a few key presses. Your cordless telephone stores up to 20 names/numbers in the handset.
•In memory dialing operation, you must press a key within 30 seconds or the phone will return to the standby mode. If you return the handset to the base, the phone will return to the standby mode also.
•You have 30 seconds after pressing mem to enter the number you wish to store. Otherwise, an error tone will sound.
1) Press mem, ¨Select Memory¨ is displayed.
2) Press the vol/ring/ 
or vol/ring/ 
key, or enter a number (01 - 20) to select the memory location where you would like to store the number.
3)Press mem or select.
4)Press mem or select. The following screen appears and a cursor flashes indicating that the display is ready for the name to be entered.
If this screen appears, the selected memory location is already stored. Then you must either edit the entry in this location, delete the entry in this location, or select ¨Go Back¨ to choose another location.
5)To enter a name (up to 13 characters), use the number keys.
Select Memory 01
02 JOHN DOE
01:(Empty) Press Select to edit
Store Name
Edit Memory01
Delete Memory01
Go Back
•See the "Steps for Entering Names and Special Characters". (See page 24).
• Use the #/ 
or * /tone/ 
key to move the cursor to the desired location.
• Use delete/ch to delete characters as needed.
• Press and hold delete/ch to delete all the characters.
• If a name is not required, go to step 6.
[ 22 ] M E M O R Y D I A L I N G | www.uniden.com |
