TELEPHONE CHANNELS
To select operation (communication and scanning)on Telephone Chan-
nels, Press GRP, then Press SCN . --- will appear on the LCD
Panel.
USCG CHANNELS
To select operation (communication and scanning) on USCG Channels,
PressGRP, then Press H/L. USCG will appear on the LCD Panel.
ENT (Entering channel numbers into Memory Scan)
You can enter channels into Memory Scan for instant scanning at any
time.
To enter a channel number into Memory Scan, access the channel
number you want to store by turning the Rotary Channel Selector,
Press F/C, then Press DIM. Memory can also be programmed during
SCAN or SEEK while stopping on a signal. Press F/C, then Press DIM,
to storethe channel number in Memory Scan.
NOTE: In order for all functions of the LTD 950 to work properly, ill
least one channel number must be entered into Memory Scan
before operating the radio.
MEMORY SCAN
Toscan channels stored in MemoryScan, Press GRP, then Press DIM.
MEMO appears on the LCD Panel. Inthe Memory Scan Mode, the LTD
950 scans only those channel numbers previously entered into Memory
Scan. If no channel has beenentered into Memory Scan, the NOand
MEMO indicators will appearon the LCDPanel. The NO indicatorwill
blink. Pressing any buttonwill return the radio tothe channel it was on
prior to accessing Memory Scan.
PUBLIC ADDRESS
To access the Public Address Mode, Press F/C,then Press H/L. The
PA indicator will appear in the Channel Number Display area on the
LCD Panel.
Pressthe Press-To-Talk switch on the microphone. Holdthe micro-
phone approximately two inches from your mouth and speak clearly in a
normal voice. Releasethe Press-To-Talk switch when you are finished
broadcasting. 13
~
------