Uniden LTD 950 j

TIMED SCAN (SEEK)

PressSCN to start SEEK (Timed Scan).

When SCN is pressed for the first time afterthe LTD 950 is turned on,

scanningwill be in the SEEK (Timed Scan) Mode, and SEEK and DUAL

will display on the LCD Panel.

Noticethat Dual Watch is on automaticaly to cover CH 16 when SCN is

pressed.

Ifthere istoo much activity on CH 16, and youwish to exclude itfrom

SEEK, Press F/C, then Press C16 to cancel Dual Watch. (DUAL is no

longerdisplayed on the LCD Panel.)

In SEEK, the radio stops on the first active channel and stays on for 4

(four) seconds, then resumes Timed Scanning to the next active chan-

nel. If SCN is pressed while the radio is stopped on an active channel,

SEEK will be resumed immediately.

To stop scanning and remainon an active channel, Press HLD. If you

are in a group scan mode (FISH, ---, USCG,MEMO, or WX), Press

HLD to stepthrough the channels in that groupone at a time. Ifyou are

not ina group scan mode, Press HLD to step through all channels one at

a time.

NORMAL SCAN (SCAN)

Pressand Hold SCN until SEEK goes off and SCAN displays on the

LCD Panel. This changes the scanning from Timed Scan to Normal

Scan.

In NormalScan, the radio will stop on the first active channel and stay

untilthe signal is gone, or SCN is pressedto resume scanning.

Noticethat Dual Watch is on automatically to cover CH 16 when SCAN

Mode is activated.

Ifthere is too much activity on CH 16, and you wish to exclude it from

SCAN, Press F/C,then Press C16 to cancel Dual Watch. (DUAL is no

longerdisplayed on the LCD Panel.)

~r--