Note: AM broadcasts are subject to interference from many outside sources, as well as weather disturbances. The signal strength and atmospheric conditions can also play a part in reception.

Operation - FM Band

1.Momentarily press

BAND/1/2.5/5W to switch to the FM band.

.Press either ▲ or ▼ to

select a local FM station.

The default (USA) step option is 200MHz per press of either

the ▲ or ▼ key. To change to 100MHz steps, see Page 43. If selected, Europe replaces USA in the upper right corner of the LCD.

Note: Typical FM broadcasts rarely reach more than 30 miles from the transmitter and terrain may also be a factor.

Operation - Aircraft Band

1. Momentarily press BAND/1/2.5/5W to change to the aircraft band.

.Press either ▲ or ▼

to select a channel. Hold down either key to change frequencies rapidly.

The default aircraft step option is 25KHz steps per press of either the ▲ or ▼ key.

After holding ▲ for more than a second, if you release it, the radio will scan all frequencies until it finds a signal, and will stay on that frequency.

Uniden MHS550 Radio Owner’s Manual

33

Page 33
Image 33
Uniden MHS550 manual Operation FM Band, Operation Aircraft Band