2. Lower the battery until it rests flat in the compartment.
3. Bring the battery latch up and snap it into place.
Charging the battery
Connecting the charger
Align the charger with the battery (on the rear side of the radio). Slide the radio into the charger until it clicks into place.
Connect the other end
of the charger to any standard 12 volt DC “cigarette lighter” style outlet. The power LED on the top of the plug should turn orange and remain lit.
CAUTION: If the LED blinks, immediately disconnect the charger from the DC outlet. Reseat the radio in the charger before reconnecting the charger to power.
CAUTION: Use only the battery and charger supplied with this radio. Using a different charger or battery can damage the radio and create a risk of fire or shock.
Important notes on charging the battery
•Charge the battery fully before using the radio.
•When the battery is completely charged, the power LED turns green.
•Don’t use the charger when the ambient temperature is below 0º C (32º F) or above 45º C (113º F).
•If the radio is powered down, the battery can charge in about three and a half hours. (If the radio is powered on, the battery takes longer to charge.)
•If the battery is empty, the radio can’t transmit, even if it’s in the charger.
Uniden MHS75 Radio Owner’s Manual |
