•Be careful moving the charger cord. If you have to move the cord while the radio is charging, pick up the radio first so you don’t drop it.
Disconnecting the charger
Squeeze in on the release tabs at the base of the charger, and slide the radio out.
Attaching the belt clip
To attach the belt clip:
1. Rotate the belt clip so that the finger indentation is towards the top of the radio.
2. Align the center of the clip with the anchor post.
3. Place the clip on the post
and slide the clip upwards until it clicks into place.
To remove the belt clip:
1. Rotate the clip so that the finger indentation is
towards the bottom of the radio.
2. Slide the clip up until it comes free of the anchor post.
Uniden MHS75 Radio Owner’s Manual |
