Press and hold
or 
to quickly scroll through numbers on the display.
Selecting the message record time
You can set your answering system to record messages up to one or four minutes long.
One minute option: move the REC TIME switch to 1.
Four minutes option: move the REC TIME switch to 4.
▼ Announce only feature:
The announce only feature plays an outgoing message, but it will not allow the caller to leave a message. Move the REC TIME switch to the ANN position. The message counter LED displays “ 
“ when the system is on standby. Prerecorded outgoing message for Announce only feature is:
“Hello, no one is available to take your call.“ (twice)
Selecting a PIN code
To play your messages from a remote location, you will need to enter a
1On the base, press and hold 
until a tone sounds and the LED
displays 
.
2 To set the f irst number, press | or | repeatedly to scroll from | |
0 to 9. When the desired number appears in the display, press | . | ||
3To set the second number, press 
or 
to scroll from 0 to 9.
When the desired number appears in the display, press 
. Then the entered PIN code is announced.
[ 40 ] T H E I N T E G R AT E D A N S W E R I N G D E V I C E
