Direct Wall Mounting

If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

Try to mount your phone within 5-feet of a working phone jack to avoid excessive wire lengths.

Make sure the wall material is capable of supporting the weight of the base and handset.

Use #10 screws with a minimum length of 1-3/8 inches, with anchoring devices suitable for the wall material where the base unit will be placed.

) Insert two mounting screws into the wall, using the appropriate anchoring device, 3-15/16 inches apart. Allow about 1/8 inch between the wall and screw heads for mounting the phone.

2) Refer to the steps on page 13 to complete the mounting process.

TOP

1/8 in.

3-15/16 in.

1-3/8 in.

14

Page 15
Image 15
Uniden TRU9380-3 manual Direct Wall Mounting