Installation

Charging the Battery Pack

The rechargeable nickel-cadmium battery pack must be fully charged before using your phone for the first time. Before plugging the phone line into your new phone, you must charge the battery for approximately 15 hours without interruption.

1. Remove the handset battery cover.

2. Plug the battery cable into the handset and place the battery pack inside the battery compartment.

3. Replace the battery cover.

Charging the Handset

To charge, place the handset on the base as shown with the keypad facing forward.

The plastic connectors will fit together only one way. Make sure the battery´s connector is properly aligned.

Use only the Uniden battery pack (model BT-905).

Replacement batteries are also available through the Uniden Parts Department. (See page 3)

I N S TA L L AT I O N

I N S TA L L AT I O N [5 ]

Page 7
Image 7
Uniden TRU 341 owner manual Installation, Charging the Battery Pack