Battery use time (per charge)

From fully charged

6 hours continuous use.

7 days when the handset is in the standby mode.

When the battery charge becomes low

When the voltage of battery pack in the handset is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the battery charge becomes low, “Low Battery“ appears on the LCD. If the phone is in use, the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging.

Cleaning the charging contacts

To maintain a good charge, it is important to clean the battery contacts on the handset and base unit with a dry cloth or a pencil eraser about once a month.

Do not use any liquids or solvents.

Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance,

be sure to return the handset to the base unit after a telephone call for charging the battery.

The built-in memory backup can hold numbers and names stored in the memory for up to 2 minutes, while you replace the battery pack.

If you must replace the

battery pack during a telephone call, complete the replacement of the battery pack within

30 seconds, and you can return to the original call.

G E T T I N G S TA R T E D [ 11 ]

G E T T I N G S T A R T E D

Page 13
Image 13
Uniden TRU 3465 Battery use time per charge, When the battery charge becomes low, Cleaning the charging contacts