Uniden TRU 3465 owner manual Connect the base unit, Choose the dialing mode

Connect the base unit

1 Connect the telephone line cord to the TEL LINE jack and to a telephone outlet.

2	Connect the AC adapter to the DC		• Place the power cord so
	IN 9V jack and to a standard 120V		it does not create a trip
			hazard or where it could
	AC wall outlet.
			become chafed and
			create a fire or electrical
3	Set the base unit on a desk or		hazard.
	tabletop and place the handset on		• Use only the supplied
	the base unit as shown. Then raise
			AD-312 AC adapter. Do
	the antenna to a vertical position.		not use any other AC
			adapter.
	If your telephone outlet isn´t modular, contact
	your telephone company for assistance.		• Connect the AC adapter
		Modular	to a continuous power
			supply.

Choose the dialing mode		• Place the base unit close
Depending on your dialing system, set the PULSE-TONE switch as follows:		to the AC outlet so that
		you can unplug the AC
If your dialing system is	Set the switch to	adapter easily.
Tone	TONE
Pulse	PULSE
If you aren´t sure of your dialing system,
make a trial call with the PULSE-TONE switch
set to TONE.
If the call connects, leave the switch as is;
otherwise, set to PULSE.	G E T T I N G S TA R T E D [ 9 ]

G E T T I N G S T A R T E D