Uniden TRU 3465 owner manual Making a Call, Dialing from Standby Mode

•Press delete/int com if

you enter a wrong number at the step 1. To delete all the numbers that you have entered, press and hold

delete/int com until the

display clears.

• You must press a key

within 20 seconds or the

phone will return to

standby.

Making a Call

Dialing from Standby Mode

1Enter the phone number and press talk . “Talk“ flashes on the display.

Then current volume setting is displayed.

2The number is dialed. After about 5 seconds, the call-time display appears.

3To hang up, press talk or place the handset on the base. The call-time will be displayed for about 5 seconds.

Talk 8178583300

Talk <High>

Talk 0:00 8178583300

• Refer to terminology

explanation on Page 3,

if necessary.

Other Operations
To	Do this
To improve the reception	Press	during a call.
To adjust the earpiece volume	Press • or ª during a call.
To temporarily switch to tone dial	Press	. The following numbers
(When the base is set to pulse mode)	will be sent as tone dialing.
To enter a pause within the dialing	Press	. “P“ appears on the
sequence	display which represents a pause.

[ 14 ] B A S I C S