JVC GY-DV5001 Camera Settings, Screen Size 43/LETTER Mode Selection, Filter, Suitable Location

6. SETTING AND ADJUSTMENTS BEFORE SHOOTING

6-1 Camera Settings

3.

2.

GAIN H M L OUTPUT BARS CAM OFF ON AUTOKNEE WHT.BAL

OPEN

EDITSEARCH

MONITOR

FILTER

13200K

2 5600K / ND

.3 5600K

.4 5600K / ND SHUTTER STATUS

						LCD BRIGHT		DISPLAY
MENU
					AUDIO			PULL
					LEVEL
						FRONT		OPEN
AUTO IRIS	FULL AUTO	BLACK	LOLUX	CH-1	CH-2	REAR
			MODE			CH-1	CH-2
BACK L		STRETCH				AUDIO INPUT
NORMAL		NORMAL	VTR			CH-1	CH-2
SPOT L		COMPRESS	CAM			MANUAL
						AUTO
POWER		VTR
ON	OFF
					1.			CAM
			POWER	VTR				indicator
			ON	OFF

RST A B	MODE
P

1. POWER SUPPLY

1First place a charged battery pack in the battery case on the rear section of the unit. If battery pack is not used, connect DC power to the DC INPUT connector on the rear section of the unit using the AC power adapter (AA-

P250) to supply DC 12 V current.

2 Set the POWER switch to ON.

2.SWITCH positions

A. MODE switch: Camera mode (CAM indicator should be on).

B. [GAIN] switch: Set to L. The L position is always 0 dB.

C. [OUTPUT] switch: Set to CAM-AUTO KNEE OFF.

D. [WHT. BAL] (Auto White Balance) switch: Set to A or B.

3.Set the lens’ iris mode switch to “A” (AUTO IRIS side)

4.Choose the proper colour temperature conversion filter.

B C D A

	FILTER	Suitable Location
1	3200K	Indoors, dark outdoors
2	5600K+1/8ND	Outdoors under clear sky
3	5600K	Outdoors
4	5600K+1/64ND	Outdoors under clear sky

VF

OFF	ZEBRA
ON	SKIN	AUTO
	AREA	WHITE
		ACCU
		FOCUS
	VTR	AUDIO
		LEVELE CH-1
		5

5. Using the SHUTTER dial, set the shutter speed to OFF (1/ 50).

4.

5.

6-2 Screen Size (4:3/LETTER) Mode Selection

The screen size of recorded images can be selected with the ASPECT RATIO item on the CAMERA OPERATION menu screen.

☞See page 71.

●To record using the standard screen, set ASPECT RATIO to 4:3.

●When ASPECT RATIO is set to LETTER, the image is recorded in a 16:9 aspect ratio with the upper and lower parts of the image cut. In this case, the viewfinder screen or LCD will show the 16:9 aspect ratio image with the upper and lower parts of the image cut.

MEMO:

●The safety zone of the standard screen and the 16:9 screen can be displayed in the viewfinder or LCD by setting the SAFETY ZONE item on the LCD/VF (1/2) menu screen. ☞ See page 75.

●When ASPECT RATIO is set to LETTER, 16:9 aspect ratio distinction ID signal is output from the Y/C OUT terminal.

●When setting DATE REC in the TIME/DATE menu screen to “BARS” or “BARS + CAM”, the screen size will be fixed at an aspect ratio of 4:3.

E-45