2. CONTROLS, INDICATORS AND CONNECTORS

MEMO:

The volume of the alarm sound is set with the ALARM VR LEVEL item on the OTHERS (2/2) menu screen.

When using a stereotype jack and stereo sound should be output, the following setting should be performed.

Set the MONITOR SELECT switch to “MIX”.

Set the AUDIO MONITOR item on the AUDIO menu screen to STEREO.

6[DV] connector

Using a DV cable (optional), a digital video component with DV connector can be connected here.

This connector is used for input or output of the DV signal or to input the VTR control signal from a digital video component with DV connector.

To record the DV signal from this connector, set the unit to the VTR mode. (GY-DV5001 only)

(Press the MODE switch ^ on page 13 upward to turn on the VTR indicator.)

Camera mode:

The DV compressed signal (IEEE1394) of the camera image is output.

VTR mode:

During playback, the tape playback DV compressed signal is output.

The DV input signal from this connector can be recorded on tape. (GY-DV5001 only)

MEMO:

To receive FF/REW remote control signals from this connector, select the setting with the REM FF/REW MODE item on the OTHERS (1/2) menu screen.

7Battery holder

Mount Flat shape type battery pack here.

See “Using Flat Shape Type Battery Pack” on page 34.

8Battery holder lock release knob

This knob is used to open the battery case cover. Press the knob while turning to open the cover.

9[BREAKER] Breaker button

The breaker trips when the power consumption exceeds the capacity.

If the breaker trips, confirm that there are no abnormalities and that the power consumption does not exceed the rated wattage. If no abnormalities are detected, press the BREAKER button before turning the power ON again to put the camera in the operating status.

If the unit still does not work normally, please consult the person in charge of professional video equipment at your nearest JVC-authorized service agent.

E-19

Page 19
Image 19
JVC GY-DV5001 manual DV connector, Battery holder lock release knob, Breaker Breaker button