E-81
11. MENU SCREENS
■OTHERS (2/2) Menu Screen
ALARM VR
LEVEL
BATTERY
TYPE
FRONT
TALLY
BACK TALLY
PAGE BACK
DRUM HOUR
OFF
LOW
MIDDLE
HIGH
12V
13.2V
14.4V
BLINK
ON
OFF
BLINK
ON
–––––
–––––
Selects whether or not alarm sound is emitted and the volume of the
alarm sound.
The alarm sound is output through the monitoring loudspeaker and the
PHONES jack.
OFF : Sound is not output.
LOW :Alarm sound is soft.
MIDDLE: Alarm sound is normal.
HIGH : Alarm sound is loud.
To be set in accordance with the used battery back type.
12V : Choose this setting when using 12 V battery (12VDC Flat shape
type).
13.2V : Choose this setting when using 13.2 V battery (Anton-Bauer
Trimpack 13, Propack 13, Magnum 13, Compack 13).
14.4V : Choose this setting when using 14.4 V battery (Anton-Bauer
Trimpack 14, Propack 14, Magnum 14, Compack 14).
Selects the lighting method of the TALLY lamp in the viewfinder during
recording. This setting is valid when the viewfinder’s TALLY switch is set
to ON.
BLINK : The lamp blinks from when the VTR trigger is pressed and until
recording starts. The lamp lights steadily during recording.
ON : The lamp lights only during recording.
Selects the lighting method of the TALLY lamp on the rear section during
recording.
OFF : The lamp is always off.
BLINK : The lamp blinks from when the VTR trigger is pressed and until
recording starts. The lamp lights steadily during recording.
ON : The lamp lights only during recording.
The OTHERS (1/2) menu screen returns when the SHUTTER dial is
pressed while the cursor is at this position.
Displays the accumulated time that the drum has been in operation. To be
used as a yardstick for periodical maintenance.
The cursor ( ) cannot be moved to this item.
HIGH
12V
BLINK
BLINK
–––––
–––––
Item Function Variation Range Initial Setting
●If this setting is wrong or neglected, the unit’s display of remaining
battery power and generation of battery alarm will not work correctly.
●This setting is valid when a battery pack is used. It is invalid when
a DC power supply is used.