E-43
5. PREPARATIONS
Date
Whether or not the time and date should be displayed on the
screen and how to display them are set on the TIME/DATE
menu screen.
1.
Display the TIME/DATE menu screen.
1Select the TC/UB/CLOCK item on the TOP MENU
screen.
2Select the TIME/DATE item on the TC/UB/CLOCK menu
screen.
2.
Set the TIME/DATE menu screen.
●DISPLAY item : Sets whether or not date and
time should be displayed. Set
to ON to display the indications.
●DISPLAY MODE item : Sets the video output mode in
which date and time should be
displayed.
BARS : Displayed when the OUTPUT switch
on the side section is set to BARS.
CAM : Displayed when the OUTPUT switch
on the side section is set to CAM.
BARS + CAM : Date and time are always displayed.
●DISPLAY STYLE: Sets the style in which the date and
time are displayed.
DATE + TIME: Date and time are displayed.
DATE : Date only is displayed.
TIME : Time only is displayed.
■Display of date and time in the various operation modes.
In Camera mode : The date and time of the internal
clock are displayed.
In VTR playback mode: The date and time recorded on the
tape are displayed.
(Only when the DATE REC item is
set to OFF.)
In VTR stop mode : The last read date and time values
are displayed.
During DV signal input: The date and time from the DV
(GY-DV5001 only) connector are displayed.
Displaying the Time and Date on the Screen
––– TC/UB/CLOCK –––
TC PRESET 00:00:00:00
EXECUTE
TC CLEAR CANCEL
UB PRESET 00 00 00 00
EXECUTE
UB CLEAR CANCEL
UB REC ON
TIME/DATE..
PAGE BACK
HEADER REC..
––– TIME/DATE –––
DISPLAY ON
DISPLAY MODE BARS+CAM
DATE REC OFF
DISPLAY STYLE DATE+TIME
DATE STYLE DD/MM/YY
TIME STYLE 24HOUR
SEC DISPLAY ON
CLOCK ADJUST..
PAGE BACK
FAS
–3dB
FAW
I
SD
B
12
.2V
01/02/03
AM
01:23:45
––– TIME/DATE –––
DISPLAY ON
DISPLAY MODE BARS+CAM
DATE REC BARS+CAM
DISPLAY STYLE DATE+TIME
DATE STYLE DD/MM/YY
TIME STYLE 24HOUR
SEC DISPLAY ON
CLOCK ADJUST..
PAGE BACK
TC/UB/CLOCK menu screen
TIME/DATE menu screen
Time
Recording the Date and Time Data
To record the date and time data during shooting, make the
menu settings described below. When the DATE REC item on
the TIME/DATE menu screen is set to “BARS” or “BARS +
CAM”, the screen size will be fixed at an aspect ratio of 4:3.
■Setting the TIME/DATE menu
●DISPLAY item : Set to ON.
●DATE REC item :Select the video mode in which date
and time data should be recorded.
BARS : Date and time data are recorded only
when colour bars are output.
BARS+CAM : Date and time data are recorded when
colour bars and camera image are
output.
OFF : Date and time data are not recorded.
TIME/DATE menu screen
MEMO:
DATE REC cannot be set during recording.
MEMO:
To display the date and time recorded on the tape, set the
DATE REC item to OFF. When the DATE REC item is set
to BARS or BARS+CAM, the date and time recorded on
the tape are not displayed even if this item is set to ON.