JVC GY-DV5001 manual 11-2Setting Menu Screens, Status button, Shutter STA

11. MENU SCREENS

11-2Setting Menu Screens

OPEN

EDITSEARCH

MONITOR

FILTER

13200K

2 5600K / ND

.3 5600K

.4 5600K / ND

SHUTTER	STATUS
						LCD BRIGHT		DISPLAY
MENU
					AUDIO			PULL
					LEVEL
						FRONT		OPEN
AUTO IRIS	FULL AUTO	BLACK	LOLUX	CH-1	CH-2	REAR
						CH-1	CH-2
BACK L		STRETCH		MODE		AUDIO INPUT
				VTR		AUDIO SELECT
NORMAL		NORMAL				CH-1	CH-2
SPOT L		COMPRESS		CAM		MANUAL
						AUTO

POWER VTR

ON OFF

STATUS button

SHUTTER STA

SHUT-

TERMENU dial

Cursor	MENU screen
		––– MENU –––
	CAMERA OPERATION..
	CAMERA PROCESS..
	AUDIO..
	LCD/VF..
	TC/UB/CLOCK..
	OTHERS..
	FILE MANAGE..
	MENU ALL RESET		CANCEL
	EXIT

TOP MENU screen

Item

––– CAMERA OPERATION –––

SHUTTER	STEP
FAW	PRESET
GAIN L	6dB
GAIN M	9dB
GAIN H	ALC
LOLUX GAIN	30dB
SMOOTH TRANS	ON
SPOT L/BACK L	MID
ASPECT RATIO	4:3
PAGE BACK

CAMERA OPERATION MENU screen

Make the settings while observing the LCD monitor or the viewfinder screen. If the OUTPUT CHAR. item on the OTHERS (1/2) screen is set to ON, the menu screen can also be viewed on a monitor connected to the MONITOR OUT or Y/C OUT connector.

1. Set the POWER switch to ON.

2. Set the mode of the GY-DV5000 with the MODE switch. (Camera mode or VTR mode)

3. Press the STATUS button for 1 second or longer.

●The TOP MENU screen appears.

4.Select the menu screen to be set.

Rotate the SHUTTER dial to align the cursor () with the menu screen to be set, and then press the SHUTTER dial.

●The selected menu screen appears.

5.Select the menu item on the menu screen.

Rotate the SHUTTER dial to align the cursor () with the item to be set, and then press the SHUTTER dial.

●The setting area of the selected item starts blinking, and the setting can now be made.

6.Change the setting.

Rotate the SHUTTER dial to change the setting, and then press the SHUTTER dial.

●The setting area stops blinking and the setting is entered.

■To change multiple items, repeat the procedures in steps 5. and 6. above.

7. Return to the TOP MENU.

Rotate the SHUTTER dial to align the cursor () with the PAGE BACK item, and then press the SHUTTER dial.

■To change settings on other menu screens, repeat the procedures in steps 4. to 7. above.

■To save the set contents in FILE CAM1 or CAM2, select the FILE MANAGE menu screen and perform the operations for saving to file. ☞ See “FILE MANAGE Menu Screen” on page 69.

8. To return to the normal screen after completing the settings, use either of the following methods.

●Press the STATUS button or

●Return to the TOP MENU screen and align the cursor () with the EXIT item, and then press the SHUTTER dial.

E-68