25
Making the SYSTEM Settings (SYSTEM Setup)
NS THRESHOLD Setting
This sets how much of the internal noise suppressor is
applied.
The noise suppressor is an effect that reduces guitar-
generated noise and hum.
1. Rotate [AMP TYPE] to select
“AMERICAN CLEAN” (NS THRESHOLD).
2. Press a MEMORY button [1]–[10] to set the amount of
effect.
FOOT SW (FS1/FS2) Setting
This selects the action for the foot switch (BOSS FS-5U;
optional) connected to the FOOT SW jack.
1. Rotate [AMP TYPE] to select
“TWEED” (FOOT SW (FS1/FS2) ).
2. Press MEMORY button [1], [2], [3], or [4] to select the
function for the foot switch.
* When a single foot switch is connected with one cable to the
FOOT SW jack, the switch is used for FS1 function.
EXP PEDAL MODE Setting
This selects the pedal function when an expression pedal is
connected.
1. Rotate [AMP TYPE] to select
“BRITISH” (EXP PEDAL MODE).
2. Press MEMORY button [1], [2], or [3] to select the
function for the expression pedal.
EXP PEDAL HOLD Setting
This selects the action for the expression pedal when
switching memories.
1. Rotate [AMP TYPE] to select
“MATCH” (EXP PEDAL HOLD).
2. Press MEMORY button [1] or [2] to select the function
for the expression pedal.
Memory button Setting
[1]–[10] 0 (Off)–9
Memory button Setting
[1] EFX/DELAY
FS1: Switchng the EFX on/off
FS2: Switchng the Delay on/off
[2] MEMORY ▼/▲
FS1: Memory number down
FS2: Memory number up
[3] TAP/DELAY
FS1: Tap input
FS2: Switchng the Delay on/off
[4] MANUAL/TUNER
FS1:
Switching the Manual/Memory mode
FS2:
Switchng the Tuner on/off
Memory button Setting
[1] VOLUME/GK/WAH
• When GUITAR TYPE is set to
SYNTH LEAD or SYNTH PAD,
the pedal controls the filter.
• When WAH is selected for EFX,
it functions as a wah pedal.
• With all other settings, it functions
as a volume pedal.
[2] GK/WAH
• When GUITAR TYPE is set to
SYNTH LEAD or SYNTH PAD,
the pedal controls the filter.
• When WAH is selected for EFX,
it functions as a wah pedal.
[3] VOLUME
The pedal functions as a volume
pedal at all times.
Memory button Setting
[1] ON
When memories are switched, the
volume (setting) will be as specified
by the position of the pedal.
[2] OFF
When memories are switched, the
level settings stored in the memories
are used, regardless of the pedal
position.
The pedal functions as an expres-
sion pedal as soon as it is adjusted.