Additional Data, Restoring the Factory Settings | Roland VGA-3

Additional Data

Restoring the Factory Settings

The data created up to the point when the factory settings are restored is lost.

When Restoring All Settings to Their Factory Settings

You can reinitialize the content of the VGA-3’s forty memories, GK Setup settings, and the SYSTEM Setup settings to their original factory settings.

3.If you want to continue and reinitialize the data, press [WRITE] two times.

The [WRITE] indicator flashes, and when the settings are completed, the VGA-3 returns to MEMORY Number 1.

1.Hold down [WRITE] while you switch ON the POWER switch.

MEMORY [1] flashes, while MEMORY [2] and [3]

remain lit.

fig.0230

Flash LitLit

* If you want to cancel the reset, turn the power off.

2.If you want to continue and reinitialize the data, press [WRITE] two times.

The [WRITE] indicator flashes, and when the settings are completed, the VGA-3 returns to MEMORY Number 1.

When Restoring Only the Memories to Their Factory Settings

1.Hold down [WRITE] while you switch ON the POWER switch.

MEMORY [1] flashes, while MEMORY [2] and [3] remain lit.

2.Press MEMORY button [2].

MEMORY [2] flashes, while MEMORY [1] and [3]

remain lit.

fig.0240

When Restoring GK Setup settings and SYSTEM Setup Settings to Their Factory Settings

1.Hold down [WRITE] while you switch ON the POWER switch.

MEMORY [1] flashes, while MEMORY [2] and [3]

remain lit.

fig.0230

2.Press MEMORY button [3].

MEMORY [3] flashes, while MEMORY [1] and [2]

remain lit.

fig.0250

LitLit Flash

* If you want to cancel the reset, turn the power off.

3.If you want to continue and reinitialize the data, press [WRITE] two times.

The [WRITE] indicator flashes, and when the settings are completed, the VGA-3 returns to MEMORY Number 1.

Lit Flash Lit

* If you want to cancel the reset, turn the power off.

27

Image 27

Roland VGA-3 Additional Data, Restoring the Factory Settings, When Restoring All Settings to Their Factory Settings

Contents

Cosm Amplifier Main Features Important Safety Instructions Page Fig. a Power Supply PlacementMaintenance Additional Precautions Contents Front Panel Basic Operation Write Button Rear Panel Turning the Power On Settings for the GK Pickup GK Setup Preparations for using the GK PickupBasic Setting Procedure Type of Settings GK Setting SettingsGK Direction Setting Rotate Guitar Type to select GK Phase SettingGK S1/S2 Setting GK Sens 6-1 Settings Press Tuner GK Level SettingFinishing the GK Setup GK Setup Chart Special List of Guitar TypesElectric Acoustic Select Poly Octave Press Pickup to select the pattern More Advanced OperationSynth Filter Poly Octave String Select List of Amp Types StackCombo Effects Warm Setting the Delay Time with TAP InputChanging the Doubling Delay Time Clear Spring Plate Press Memory button to select the memory to be called up Storing Knob and Button Settings to Memory WriteOperate the knob for the setting you want to check Calling Up Memory Switching Memories With the GFC-50 Using the GFC-50 to Operate the VGA-3Connecting the VGA-3 and the GFC-50 How to Call Up the VGA-3’s Memories Using the GFC-50 Storing Writing to the VGA-3’s Memories Using the GFC-50 Control Using an External Foot Switch or PedalPress the VGA-3’s Write 1 once more Start the System Setup Making the System Settings System SetupTuner Pitch Setting Tuner Level Setting EXP Pedal Hold Setting NS Threshold SettingFoot SW FS1/FS2 Setting EXP Pedal Mode Setting System Setup Chart Finishing the System Setup Midi Omni Mode Setting Additional Data Restoring the Factory SettingsWhen Restoring All Settings to Their Factory Settings Hold down Write while you switch on the Power switch Press Write two times Troubleshooting Other ProblemsTrouble with the Sound Block Diagram/Effect Connection Procedure Midi Implementation Chart VGA-3 V-GUITAR Amplifier Specifications Guitar Type AMP Type EFX Delay Reverb Memory Sheet Factory Settings Memo Avis